Tool Needed for BMW IMMO, Mileage, Diagnosis

Suggestion for those looking for a tool to do BMW key programming, mileage adjustment, diagnosis

Better buy separate devices, VVDI2 for key programming, Digimaster 3 for odometer correction, BMW ICOM for diagnosis.

VVDI2 for BMW key programming:

Ews 1-4, cas 1-4, fem/bdc

Digimaster 3 for odometer correction:

Digimaster3 BMW Car List (2000-2017 )
BMW Car Model CAS1
912DG128
(3K91D)
CAS2
9S12DG256
(2K79X)
CAS3
9S12DG256
(0L01Y)
CAS3+
9S12XDP512
(0L15Y)
CAS4
9S12XDP512
(1L15Y)
9S12XEP100
(5M48H)
FEM
BMW 1 Series 2004-2006
(E87)
2007(E87) 2008-2011
(E87)
2012-2014
(F20)
BMW 3 Series 2005-2006
(E90)
2007(E90) 2008-2012
(E90)
2013-2014
(F30/F35)
BMW 5 Series 2004-2006
(E60)
2007(E60) 2008-2010
(E60)
2010-2014
(F07/F10/F11/F18)
Not available yet
BMW 6 Series 2004-2007
(E63/E64)
2008(E63/E64) 2009-2010
(E63/E64)
2011-2013
(F12/F13)
Not available yet
BMW 7 Series 2001-2004
(E65)
2004-2008
(E66)
2009-2013
(F01/F02)
Not available yet
BMW X1 Series 2010-2014
(E84)
Not available yet
BMW X3 Series 2011-2013
(F25)
Not available yet
BMW X5 Series 2007(E70) 2008-2013
(E70)
2014(F15)
BMW X6 Series 2008-2014
(E71)
Not available yet Not available yet
BMW Z4 Series 2010-2013
(E89)
Not available yet Not available yet

Note: Digiprog 3 vs. Digimaster 3

Both Digi3 and Digimaster should do the job. Digi3 is cheap and good, Digimaster is more like a professional tool, and of course costs much more.

BMW ICOM for diagnosis:


ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose for BMW all series and models from all systems.

ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules for BMW Group vehicles

KSD—for BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There`s also information about wheels and rims for the various models.

IToolRadar— Used to recognize ICOM, activate or release ICOM Port

ETK— Accessories Catalog

INPA— Engineer Soft-ware for E series, for diagnosis

WinKFP—Engineer Soft-ware for E series, for programming

E-sys — Engineer Soft-ware for F series (available for programming and coding)

and so on……

sales