People sometimes fail to read M35080 with VVDI Prog Xhorse if not equipped with good soldering technique. But now, an easier solution for you. Read M35080 with the help a M35080/D80 adapter, no longer need soldering.
What’s difference of reading M35080 with/without an M35080/D80 adapter?
With a M35080/D80 adapter:
Remove the M35080 chip and connect/put into the M35080/D80 adapter to read data using VVDI-Prog
Without a M35080/D80 adapter:
Remove the M35080 chip, solder it, read data with VVDI Prog, desolder it and solder it back
(require good soldering tech!!!)
(it’s much more convenient for users to read M35080, if with a VVDI Prog M35080/D80 adapter)
Where is the M35080 chip?
Here is a picture of the M35080 chips location, after i removed it.
What chips is required to read with a M35080/D80 adapter?
The following chips in <1-EEPROM&FLASH> needs read with VVDI Prog plus M35080/D80 adapter :
VVDI Prog User Manual pdf: http://www.obd2diy.fr/upload/pro/vvdi-prog-v4.6.2-user-manual.pdf
VVDI Prog Full Kit: http://www.obd2diy.fr/wholesale/vvdi-prog-programmer.html
VVDI PROG M35080/D80 adapter: http://www.obd2diy.fr/wholesale/xhorse-vvdi-prog-programmer-m35080-d80-adapter.html