OBDSTAR F108+ PSA (Peugeot Citroen DS) PIN CODE reader fast reads pin code via OBD with success and safe.
Here OBDSTAR F108+ Hardware & PCB, looks great.
P/C/DS ver: 31.20
full chip PCB F108+:
I’m sure full chip PCB F108+ with last update can retrieve all PIN code , it’s the same BSI for PSA ( Siemens , Valeo & J-C ) .
And if it’s not FULL CHIP tool F108+ , CONNECTION BREAK DOWN , k-line is not operational .
OBDSTAR F108+ read pin with working key:
Citroen ds3 2013- ok
Citroen picaso 2009- ok
Peugeot 207sw 2004- ok
Peugeot 407 2004-ok
Peugeot 307 2005- ok
Peugeot 508 2008-OK, about 5 to 8 minutes
2010 C4 picasso- ok
2012 308 read pin code within 6-7 minutes. all fine.
207 2009. Need ignition On – OFF 10 times in 7mn. Pin read successful.
Peugeot 208 2013, very fast. Only ignition OFF – ON 1 time and it give pincode.
C3 2014 Valeo BSI, one time OFF ON and give pincode.
Peugeot 307 2008 pin code read-ok
Citroen C5 FAST-OK
307 CAN > 2005 PIN CODE OK , 4/5 minute
Tested on PEUGEOT 307, year 2006- ok
Peugeot 207 -07 PIN CODE OK : about 7mn
Jumpy – 08/09 PIN CODE OK: about 6mn.
Citroen Picasso 2006, reading pin OK
Citroen C3 , Engine 9HZ, year 2005, reading PIN = OK
Peugeot 207 , Engine 9HZ , year 2006, reading PIN = OK
-F108+” LAST UPDATE V31.20 positive feedback:
tested on 2004 Citron C4 , PIN code retrieve less of 4 minutes , verified with Diagbox. I plug on OBD2 and F108+ sniffing “kwp fast”traffic , i turn ignition “on/of” 10 times / 4 minutes. 2004 C4 / this car is not CAN ! CAN protocol is after 2008 on PSA car , some user say NO the CAN’T , but yes we can !
Diagbox ( in french “same PIN code registered inside BSI” )
– Someone extracted pin from over 20 cars, all fine.
Big thanks TERMINATOR1000 & Duracell2’s experience share (DK member)
How to use OBDSTAR F108+?
Not necessary to connect charger to car as it doesn’t put Bsi in service mode like psa bsi tool, or avdi where windscreen wipers would activate etc.
How to update OBDSTAR F108+ ?
Update online only by micro SD card , 1 year free access after registration , serial number + dealer ID for registration : “OBDSTAR UpgradeTools”
Question: Can OBDSTAR F108+ only support the car after 2008 year and the car which is CAN Protocol.?(Quote from one user’s experience)
Answer: No, FAKE NEWS , my report prove that F108+ support “no-CAN” car before 2008 …. I’m suppose they advertise old F108 support the car after 2008 year and the car which is CAN Protocol
Many bad feedback on forum , i’m not OBDSTAR seller , but 1 test 1 PIN !
Sure for the other buyers of F108 without chip , it’s sad , PCB is incomplet K-LINE is unplug ! no miracle …
So i have just used this little device for reading pin codes and so far 100% success. Personally I would recommend it to anyone thinking of buying one as its cost is low and 1-2 keys pays for it already.
OBDSTAR F108+ PSA pin code reader Aliexpress or a shop?
Most of my French friends don’t purchase OBDSTAR F108+ from Aliexpress although it is a cheaper place, we bought from this site, they charge more than the sellers on AliExpress but the customer service know French language, we communicate flatly and we are able to use PayPal and had no issues with payment or shipping.
OBDSTAR F108+ helps us extract the pin and save some time.