Lonsdor K518ISE read PIN code + do all keys lost to Peugeot 408 2013
Confirmed! Lonsdor K518ISE works no issues in Peugeot 408 PIN code reading and new key programming when do all keys are lost.
Peugeot key type:
Letf- Folding key (-2013)
Center- Smart remote (2014-)
Right- Folding smart remote (2014-)
PIN code is required for Peugeot key programming
(have the password card, chassis, then read via OBD)
No need disassemble BSI to read PIN code
Most key programmers support OBD read PIN code with at least one key available
Only some support PIN code reading when all keys are lost
So, how to read Peugeot PIN codes?
Here you go.
Car: Peugeot 408 2013
Device: Lonsdor K518ISE key programmer
Read Pin Code
Type 1: when at least one key aivailable
insert the key and the car start. Repeat Ignition ON/OFF for several times. Go to immo data verification
Type 2: when all keys are lost
it’s normal to see the wiper is working and headlight turns on for 30 aeconds around
Here: Type 2 – Read PIN code when all keys are lost
This function help save a lot for technicians
The biggest advantage for newbies: avoid high risk to disassemble BSI to read PIN
(to change a BSI costs 150 usd, then matching with PP2000 sw)
Read Pin code successfully
All is seondary and easy
Lonsdor K518ISE is being updated every day.
Peupeot 408 in the current version is not available
But go for 308; it’s ok to finish it
Chassis and other numbers, versions
Enter PIN code and check it
Ignition off and on within 15s.
Go to program the seond key if necessary
Repeat remote proggramming, steps:
Step 1 ignition off, then take out the key
Step 2 insert another key, ignition on
Step 3 within 20s, press any button on the remote for 5 seconds
Step 4 ignition off, and take out the key
Step 5 for more keys to be programmed, just repeat step 2-4
Done! Lonsdor K518ISE programmer is able to read PIN code and program a new key to Peugeot 408 2013 when do all keys are lost.