Looking for tools for Renault ECU Decoder and SIRIUS 32…
- Device recommended: TL866 Mini pro programmer
“if You are planning to work frequently on those ecu I recommend to buy TL866 Mini pro programmer.
With tsop44 adapter, this tool is very stable for reading F200 flash fitted on Sirius32”
I also have TL-866 programmer and that one is working good too.
wellon tells you which pins does not have good connections …
I bought TL-866 programmer with with tsop44 adapter… it’s good to have backup tools.
- Device recommended: Fgtech galletto
Read Siemens sirius 32 with Fgtech galletto on boot mode flash.
The wiring diagram below:
Red —————-> pin 29
Red —————-> pin 30
Black —————-> pin 3 ground
Green —————-> pin 56 K-Line
Yellow—————-> pin 26 L-Linea
Gray wire you can use for boot 29f200
(Gray wire has already 1000 ohm resistor )